通讯机构：
[Yang Li; Hao Kan] S;[Junli Yin] H;Hunan Province Key Laboratory for Ultra-Fast Micro/Nano Technology and Advanced Laser Manufacture, School of Electrical Engineering, University of South China, Hengyang 421001, China<&wdkj&>School of Information Science and Engineering, University of Jinan, Jinan 250022, China<&wdkj&>School of Information Science and Engineering, University of Jinan, Jinan 250022, China<&wdkj&>School of Microelectronics, Shandong University, Jinan 250101, China
作者机构：
[Wang L.-H.] College of Economics and Management, University of South China, Hengyang 421001, China;[Tang Y.-G.; Gao S.; Qu X.] College of Electrical Engineering, University of South China, Hengyang 421001, China
通讯机构：
[Qu, X.] C;College of Electrical Engineering, , Hengyang 421001, China
会议名称：
2nd International Conference on Materials Science and Manufacturing, ICMSM 2013
会议时间：
29 March 2013 through 31 March 2013
会议地点：
中国湖南张家界
关键词：
Blast furnace;Hot metal silicon content;Least squares support vector machine;Particle swarm optimization;Prediction model
摘要：
A method for compensating nonlinear characteristic of thermocouple vacuum gauge is proposed. Least squares support vector machine (LS-SVM) is adopt as compensation model, of which parameters are optimized using particle swarm optimization (PSO) algorithm. Experimental results using data obtained on-site show that the proposed approach effectively compensates the nonlinearity characteristic, and the accuracy of this method is higher than those obtained by SVM model.
作者机构：
[Luo, Qiang; Kuang, Zhonghua; Li, Lanjun; Gao, Song] Univ South China, Sch Elect Engn, Hengyang 421001, Peoples R China.
会议名称：
the 25th Chinese Control and Decision Conference(第25届中国控制与决策会议)
会议时间：
2013-05-01
会议地点：
贵阳
会议主办单位：
[Li, Lanjun;Gao, Song;Luo, Qiang;Kuang, Zhonghua] Univ South China, Sch Elect Engn, Hengyang 421001, Peoples R China.
会议论文集名称：
the 25th Chinese Control and Decision Conference(第25届中国控制与决策会议)论文集
关键词：
Tobacco feeding by air;ARM;Closed-loop control;human machine interface
摘要：
In tobacco industry, the air for feeding tobacco and the air for dusting are supported simultaneously to save energy and reduce emission. Feeding speed is vital to the quality of the production. The paper puts forward a control system based on Advanced RISC Machines(ARM), touch panel and PLC. It describes the component structure of control system, control principle and the design of hardware and software in detail. Testing results showed that the built system is running well in the cigarette maker and demonstrated excellent performance like fast and accurate response and strong robustness. Air speed during feeding is controlled precisely with deviation less than +/- 1 m/s. The system satisfied all standards of design requirement. Effective tobacco feeding will increase production safety and decrease energy and tobacco consumption.
摘要：
A simulation system for instrument cluster based on the CANoe from Vector company is developed and used for real-time cluster test and fault analysis. Test results show that the operation condition of cluster can be simulated and the fault data from CAN bus can be collected, replayed and analyzed using this system.
作者机构：
[喻寿益] College of Information Science and Engineering, Central South University, Changsha 410083, China;[高嵩; 唐耀庚] School of Electrical Engineering, University of South China, Hengyang 421001, China;[李兰君] College of Information Science and Engineering, Central South University, Changsha 410083, China, School of Electrical Engineering, University of South China, Hengyang 421001, China
通讯机构：
[Li, L.-J.] C;College of Information Science and Engineering, , Changsha 410083, China
期刊：
INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTATION TECHNOLOGY AND AUTOMATION, VOL 1, PROCEEDINGS,2008年:1008-1011
通讯作者：
Li Lanjun
作者机构：
[Li Lanjun; Yu Shouyi] Cent S Univ, Coll Informat Sci & Engn, Changsha 410083, Peoples R China.;[Li Lanjun; Gao Song; Tang Yaogeng] Univ South China, Sch Elect Engn, Hengyang 421001, Hunan, Peoples R China.
通讯机构：
[Li Lanjun] C;Cent S Univ, Coll Informat Sci & Engn, Changsha 410083, Peoples R China.
会议名称：
International Conference on Intelligent Computation Technology and Automation(2008 智能计算技术与自动化国际会议 ICICTA 2008)
会议时间：
2008-10-20
会议地点：
长沙
会议论文集名称：
International Conference on Intelligent Computation Technology and Automation(2008 智能计算技术与自动化国际会议 ICICTA 2008)论文集
摘要：
Nuclear pulse is directly related to the radiation intensity but influenced by statistical fluctuation. Because most available rate-meters have complex structure of circuits, we introduce a chip-microcomputer-based nuclear count rate measuring system which is easily incorporated into isotope gauges for measurement on level, density, thickness, etc. To make continuous measurement of the count rate, the time period is divided equally into a lot of intervals. The sample frequency is increased by making the interval smaller. The box car averaging and self-adapting weighted algorithm for continuous count rate measurement are explained in details. Simulations show that both methods can substantially decrease the statistical fluctuation by appropriately choosing the number of data used for on-line measurement and the weighted algorithm gives minimum variance. In a word, the measuring system is a fast rate meter with simple construction and high accuracy.
作者机构：
[Lanjun Li; Shouyi Yu] College of Information Science and Engineering, Central South University, Changsha, China;[Song Gao] School of Electrical Engineering, University of South China, Hengyang, China
会议名称：
2007 IEEE International Conference on Control and Automation
会议时间：
May 2007
会议地点：
Guangzhou, China
会议论文集名称：
2007 IEEE International Conference on Control and Automation
摘要：
This paper introduces an instrument for measuring the size and shape of almost any pipes' interior profile. It describes the components and principle of operation of the instrument. A modular DSP system embedded in the instrument to process the image makes the measurement fast and accurate. The design of the instrument is given from five areas such as optical, electrical, electronics, etc. It has been tested that the information derived from the intelligent instrument can assist not only in making repair decision but also in the generation of the 3-D structure of the pipes.
