版权说明 操作指南
首页 > 成果 > 详情

Effect of duty ratio on surface morphology and performance of TiAlN coatings deposited by multi-arc ion plating [占空比对多弧离子镀TiAlN涂层表面形貌和性能的影响]

认领
导出
下载 Link by 中国知网学术期刊 Link by 万方学术期刊
反馈
分享
QQ微信 微博
成果类型:
期刊论文
作者:
周军;李涛;樊湘芳;李怀林
通讯作者:
Fan, X.
作者机构:
[李涛; 樊湘芳; 周军] College of Mechanical Engineering, University of South China, Hengyang, 421001, China
[李怀林] Central Research Institute of State Power Investment Corporation, Beijing, 102209, China
通讯机构:
[Fan, X.] C
College of Mechanical Engineering, University of South China, Hengyang, China
语种:
中文
关键词:
多弧离子镀;占空比;TiAlN涂层;表面形貌;膜基结合力;高温抗氧化性;物相组成
关键词(英文):
Adhesion strength between coating and substrate;Duty ratio;High temperature oxidation resistance;Multi-arc ion plating;Phase composition;Surface morphology;TiAlN coating
期刊:
粉末冶金材料科学与工程
ISSN:
1673-0224
年:
2018
卷:
23
期:
3
页码:
328-334
基金类别:
国家科技重大专项子课题项目(2015ZX06004001-002-002) 湖南省教育厅重点实验室创新平台开放基金项目(16K076)。
机构署名:
本校为第一且通讯机构
院系归属:
机械工程学院
摘要:
采用多弧离子镀技术在不同的占空比条件下于锆合金表面制备TiAlN涂层.利用扫描电子显微镜观察涂层的表面和截面微观形貌;利用能谱分析涂层的表面元素成分;利用箱式电阻炉测试涂层在800 ℃空气中持续进行3 h的高温氧化性能;利用自动划痕仪在常温下测试涂层的膜基结合力;利用X射线衍射仪分析涂层的物相组成.结果表明:占空比可显著影响TiAlN涂层的表面和截面的微观形貌、元素成分比例、高温抗氧化性、膜基结合力及物相组成.随占空比增大,TiAlN涂层表面的大颗粒数目减少,表面质量得到改善,涂层的沉积速率先增大后减少,致密性一直增加;能谱分析表明Al元素与Ti元素质量比逐渐减小,Al元素与Ti元素的质量...
摘要(英文):
TiAlN coatings were deposited on the surface of zirconium alloys by multi-arc ion plating with different duty ratio. The surface and cross-sectional micro-morphologies were observed by scanning electron microscopy (SEM), the elemental composition of the coatings was analyzed by an energy dispersive spectroscopy (EDS). The high temperature oxidation resistance performance of coatings was tested by a box-type resistance furnace in air at 800 ℃ for 3 h. The adhesion strength of the coating to the substrate was tested by an automatic scratch teste...

反馈

验证码:
看不清楚,换一个
确定
取消

成果认领

标题:
用户 作者 通讯作者
请选择
请选择
确定
取消

提示

该栏目需要登录且有访问权限才可以访问

如果您有访问权限,请直接 登录访问

如果您没有访问权限,请联系管理员申请开通

管理员联系邮箱:yun@hnwdkj.com