版权说明 操作指南
首页 > 成果 > 详情

恒定高应变率拉伸条件下泡沫金属力学性能

认领
导出
Link by 万方学术期刊
反馈
分享
QQ微信 微博
成果类型:
期刊论文
论文标题(英文):
Mechanical property of metallic foams under dynamic tension with constant high strain rate
作者:
张晓阳;谭仕锋;刘泽宇;赵飘#&#&#ZHANG Xiaoyang;TAN Shifeng;...
作者机构:
南华大学数理学院,湖南衡阳 421001
南华大学土木工程学院,湖南衡阳 421001
[刘泽宇; 赵飘#&#&#ZHANG Xiaoyang; 谭仕锋; 张晓阳] 南华大学
语种:
中文
关键词:
恒定高应变率;动态拉伸;泡沫金属;破坏行为
期刊:
爆炸与冲击
ISSN:
1001-1455
年:
2024
卷:
44
期:
1
页码:
106-114
基金类别:
11902140:国家自然科学基金 2018JJ3425:湖南省自然科学基金项目
机构署名:
本校为第一机构
院系归属:
土木工程学院
摘要:
为了探究泡沫金属恒定应变率动态拉伸力学行为,基于3D Voronoi模型,采用双向拉伸加载方式和1.55倍等效胞孔直径高度的试件,实现了 5000s-1恒定高应变率动态拉伸条件下泡沫金属力学性能测试数值模拟实验,模拟结果显示:动态拉伸过程满足应力均匀性和变形均匀性要求,且试件破坏位置合理;在恒定应变率(0.5~5000 s-1)动态拉伸时,泡沫金属的破坏应变基本不受应变率的影响;当应变率不超过500 s-1时,破坏应力受应变率影响很小,当应变率在500~5000 s-1时,破坏应力随着加载速率的增大而线性增大.
摘要(英文):
In order to explore the dynamic behavior of metallic foams under the stretch of constant high strian rate,a few numerical simulations were conducted to explore the effects of both the height of specimen and the tensile velocity on the stress uniformity and deformation uniformity as well as the failure position of the specimen under dynamic tensile loading.And then,a feasible numerical simulation scheme was proposed to obtain dynamic tensile properties of metallic foams under dynamic tension loading with constant strain rates.According to this scheme,the max strain rate reaches 5 000 s-1 by mea...

反馈

验证码:
看不清楚,换一个
确定
取消

成果认领

标题:
用户 作者 通讯作者
请选择
请选择
确定
取消

提示

该栏目需要登录且有访问权限才可以访问

如果您有访问权限,请直接 登录访问

如果您没有访问权限,请联系管理员申请开通

管理员联系邮箱:yun@hnwdkj.com