期刊论文

中文

矿冶工程

0253-6099

2016

36

2

88-90,95

10.3969/j.issn.0253-6099.2016.02.024

湖南省科技厅重点项目资助（2013GK2023）；

本校为第一机构

针对Be含量为0.42%的铍原矿,进行了硫酸用量、预处理温度、搅拌浸出固液比等条件对铍浸出率的影响试验。结果表明,铍原矿浸出的优化工艺参数为:预处理温度280 ℃、铍矿石与浓硫酸质量比1∶ 1.5、固液比1∶ 2,此时铍浸出率达到98.2%。该工艺处理温度低,降低了能耗,为铍原矿的开发利用提供了可选途径。

With beryllium ore containing 0. 42% Be as raw material, the effects of sulfuric acid consumption,pretreatment temperature and solid / liquid ratio on beryllium recovery by agitation leaching were investigated,and the optimized leaching parameters were obtained. The leaching rate of beryllium reached 98. 20% after beryllium ore was pretreated at the temperature of 280 ℃,and leached with ore and sulfuric acid at a mass ratio of 1∶ 1. 5 and solid / liquid ratio at 1 ∶ 2. This processing technique doesn＇ t require high temperature,resulting in...